Oils for marine applications

Engine oil – Medium-speed

Delo 1000 Marine 30 

For engines that burn oil from solar oil to light heavy oils with sulfur content <1; 5%. Can also be used in reduction gear and as sleeve oil. BN> 12; SAE 30.

Delo 1000 Marine 40

For engines that burn oil from solar oil to light heavy oils with sulfur content <1; 5%. Can also be used in reduction gear and as sleeve oil. BN> 12; SAE 40

Taro 20 DP 30 X

Replaces Taro 20 DP 30. For trunk lubrication in engines that burn heavy (up to 2% sulfur) or light oils. BN> 20; SAE 30.

Taro 20 DP 40 X

For trunks lubrication in heavy-duty engines (up to 2% sulfur)
or light oils. BN> 20, SAE 40.

Taro 30 DP 30 X

Replaces Taro 30 DP 30. Marine oil with high TBN number (30). ensures stable viscosity during operation at high temperatures and provides protection against corrosive wear during long periods of operation. Recommended browsing. to trunk diesel engines and as a cylinder lubrication in cross-head motors. SAE 30.

Taro 30 DP 40 X

Replaces Taro 30 DP 40. Marine oil with high TBN number (30). ensures stable viscosity during operation at high temperatures and provides protection against corrosive wear during long periods of operation. Recommended browsing. to trunk diesel engines and as a cylinder lubrication in cross-head motors. SAE 40.

Ursa Premium TD 15W-40 

Engine oil for high-performance, large diesel engines and where desired extended shift interval according to engine manufacturers recommendations. Recommended especially for low-emission Euro-4 engines with flue gas recirculation (EGR) or selective catalytic reaction (SCR) as extrusion finishing systems.

Ursa Heavy Duty 30 

Single degree engine oil; also for transmissions in one part construction machinery.

Ursa Heavy Duty 40

Single engine oil.

Ursa Extra Duty 40

Detroit Diesel 2-stroke engine oil. Can also be used for lubrication industrial gear, pumps and chains, as well as where it is generally recommended an oil with cleansing properties.

Delo 710 LE 40 (Replaces Diesel Engine Oil 11093)

Zinc-free diesel engine oil specially developed for EMD and GE engines installed in locomotives, marine and generating sets.

Giroljer

Meropa 68/100/150/220/320/460/680/1000

Mineral industrial oil with EP additives. FZG> 12. YOUR 51517 CLP. For closed gearboxes and chains, chains, bearings, couplings etc. Usefully can be used in circulatory systems with slide and roller bearings. Resists impact stresses. Available in the following viscosities: ISO VG 68/100/150/220/320/460/680/1000.

Meropa Synthetic EP 220 (before, Pinnacle EP 220)

Fully synthetic PAO industry gauge with EP additives. FZG> 12. DIN 51517/3. Very good low and high temperature properties. High resistance to oxidation and degradation provides the opportunity for longer shift intervals. Reduces internal friction compared to conventional gears. This means lower operating temperature and and less energy loss. Recommended especially in drive boxes and screwdrivers with low speeds, especially high loads or high / low temperatures, as well as on propulsion chains subject to somewhat higher temperatures. ISO VG 220.

Texaco Outboard Gear Oil EP 90

High pressure oil for angular gear in underwater housing in outboard motors. The oil provides protection against shock loads when changing gear and fast acceleration. The tip of the tube is adapted to the oil filler hole for lighter refill.

Turbine oils

GST EP 32 (before Regal Premium EP 32 /R&O 32)

Newly developed and improved high-performance turbine oil primarily for gas,water and steam turbines, including systems with reduction gear.Based on premium base oils and ash-free anti-slip additiveswhich provides long lasting reliable protection. Premium base oil and itadvanced additive package provides long lasting oksidasjosstabilitet, keeps bearing witch is working under high temperatures free of coating, very good for water-separation, silicone-free foam absorber that quickly separates out air in the oil.
Suitable for: low pressure hydraulic systems, such as bearing oil,machine tools, vacuum pumps, electric motors, vacuum pumps.
Air compressors, turbochargers and centrifugal pumps that requirerust and oxidation protection and wear-resistant additives. ISO VG 32.

Regal Premium EP 46 (replaces R&O 46)

As for Regal Premium EP 32. EP 46 is suitable as
heat transfer oil up to 200 ° C in open systems.
ISO VG 46

Regal Premium EP 68

As Regal Premium EP 32. ISO VG 68.

Regal EP 100/150

Circulation oil for gear, as well as vacuum pump oil. ISO VG 100 and 150, see product data sheet.

Regal EP 220/320

Circulation oil for general use. ISO VG 220 and 320, see product data sheet.

Regal SGT 22

Synthetic turbine oil for stationary gas turbines.